ADA toilet paper height

Who knew the ADA toilet paper height could be so important? Making sure the height of your toilet paper roll holder is correct can make such a difference in your bathroom’s usability that many people are installing new holders or adjusting their existing ones to comply with the ADA (Americans with Disabilities Act). Find out what makes the ADA toilet paper height so important and how you can ensure that your bathroom reflects ADA standards.

ada toilet paper holder height


When it comes to finding a toilet paper holder that meets the requirements of the Americans with Disabilities Act, there are a few things you should keep in mind.

  • First, the holder must be mounted at least 15 inches above the floor.
  • Second, it must be able to dispense at least one full roll of toilet paper.
  • Third, it must be within reach of someone using a wheelchair.
  • Fourth, it must be made of durable materials.
  • Fifth, it should be easy to install and use.
  • Sixth, it shouldn’t have sharp edges or points.
  • Seventh, make sure the dispenser is flexible enough to allow for different thicknesses of toilet paper.
  • Eighth, find out if the manufacturer offers replacement parts for purchase if necessary.

ADA Toilet Paper Height


The Americans with Disabilities Act (ADA) requires that all public restrooms have at least one toilet paper holder that is mounted no higher than 44 inches from the floor. This height requirement ensures that people with disabilities can reach the toilet paper holder and use it without assistance. It also protects children who may not be able to reach a low-mounted holder on their own.

It’s important for restroom managers, contractors, or anyone else designing a new bathroom space to pay attention to this guideline when choosing a new toilet paper holder. To find the right fit for your specific needs, you need an ADA toilet paper height chart that shows different options for each possible situation.

Handicap toilet height
Handicap toilet height

Handicap toilet height


The toilet paper holder must also be at a certain height, so that people with disabilities can reach it.

There are many different types of toilet paper holders on the market, but finding one that meets the ADA requirements can be tricky. If you’re looking for a new toilet paper holder, measure your own arm span as well as your own height from the floor. Make sure there’s plenty of room for you to grip the paper and pull down comfortably.

What is considered ADA Compliant?


The Americans with Disabilities Act (ADA) sets forth specific guidelines for a variety of businesses and facilities, including restaurants, hotels, and office buildings. One of the requirements is that toilet paper dispensers be installed at a height of 48 inches from the floor. This may seem like a small detail, but it’s an important one that can make a big difference for those with limited mobility.

When considering which holder to purchase, it’s important to keep in mind what type of supplies you’re going to use. If you plan on using all-purpose roll holders, then your options are nearly limitless. However, if you’re planning on using individual rolls or half-size rolls, then you’ll need a holder that accommodates these types of rolls specifically.

ADA Toilet Paper Height
ADA Toilet Paper Height

Looking for the perfect ADA toilet paper holder height?

ADA toilet paper holders should be at least 15 in (38 cm) high and have an 8- to 12-in (20 to 30-cm) clearance underneath them to allow wheelchair users and others to use them more easily. The higher the toilet paper holder, the easier it will be for those who need assistance from another person to reach it, too. If you’re looking for an ADA-compliant toilet paper holder, check out these five options!

Choosing the Right Height


If you want to keep your stall safe and legal, know that the water closet must measure at least 180 mm. The leading edge of a door or a reach range shall not be more than 19 inches measured to the centerline of its side (measured from the centerline of a water closet). This means that it is important to also measure to find out where your centerline is in relation to your dispenser. The distance between toilet tissue dispensers should not exceed 20 inches.

Choosing Between an Elongated and Squat Toilet


If an elongated or squat design is going to be best for your lifestyle, it can help to know the ADA toilet paper height requirement. An ADA compliant water closet will measure 17 inches from the finished floor up to the centerline of the dispenser and 17 inches above floor level front of water closet to back of fixture outlet. If a chair is also required, there needs to be a distance of 18 inches between a chair and receptacle. These are some considerations when choosing ADA toilet paper height.

The Dimensions of a Single-Toilet Bathroom


Most single-toilet bathrooms are approximately 80 square feet. The ada toilet paper height of holder should be placed no more than 26 inches from the front edge of the toilet and at least 15 inches from the side wall. The ideal height for the toilet paper holder is between 38 and 48 inches from the floor. If a hand-held paper towel dispenser is also in use, it should be mounted within 36 inches from the ground.

There are many different styles and designs of toilet paper holders on the market, but these three options are among the most popular: A wall mount that’s either an open or closed cabinet with a door; A recessed shelf that sits on top of your bathroom countertop; A freestanding unit that can sit on top of your bathroom countertop or attach to a wall near your toilet.

Mounting Hardware, Installation Guides & Instructions


ADA compliant products are required to be mounted at a certain height from the finished floor of your bathroom. The front of the dispenser must be no less than 36 inches and no more than 48 inches above this same finish line. The outlet of the dispensing device should be between 27 inches and 80 inches from the centerline of the water outlet to ensure safe use by all. Frontal clearance is also important, so the bottom of the dispenser cannot be higher than 27 inches above the finished floor when measured from its lowest point or lower edge.

Read Also: 10 best Knife Subs Boxes

Similar Posts